 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Dielectric Resonator Oscillator Free Running, Mechanically Tuned Specifications (1) Model MDR2100 2.5 to 21.0 GHz : 2.5-6.0 GHz 10 MHz 5 ppm/ C 100 ppm 20 ppm/Volt -15 dBc -70 dBc +10 dBm 6.0-21.0 GHz 20 MHz 5 ppm/ C 100 ppm 20 ppm/Volt -15 dBc -70 dBc +10 dBm Frequency (GHz) 2.5 to 6.0 4.0 to 10.0 6.0 to 14.0 10.0 to 14.0 14.0 to 21.0 Frequency Range: (2) Mechanical Tuning Bandwidth (min.) Stability (max.)(3) Pulling, 12 dB RL (max.) Pushing (max.) Harmonics (max.) Spurious (max.) Output Power (min.) (4) Outline DD2A DD1 DD DD4 DD6 Phase Noise (typ.) 10 kHz Offset, dBc/Hz 100 kHz Offset, dBc/Hz 1 MHz Offset, dBc/Hz Input DC(5) Operating Temperature RF Connector DC Connector 2.5 GHz -105 -130 -150 6 GHz -99 -124 -144 12 GHz -93 -118 -138 20 GHz -88 -113 -133 +12 VDC 3% @ 125 mA max. -20 to +65C SMA Female Solder Pin Notes: 1. Specifications labeled "min." or "max." are guaranteed in a 50 Ohm system over the specified temperature range. 2. Output frequency must be specified. 3. Averaged over the full temperature range. 4. Higher output power is available. 5. Alternate input voltage available. 6. Package must be verified by Spectrum Microwave. PRODUCT LABEL AREA THIS SURFACE "C" "S" MAX "J" DIA. THRU 4 PLACES "F" "E" "G" "P" MAX "N" MAX "M" "A" GND VDC FREQ ADJUST COARSE FINE Note 1 DIMENSIONS: INCHES "L" "H" "D" "B" "R" RF OUTPUT SMA-FEMALE "K" "A" "DD" 1.65 "DD1" 1.75 "DD2A" 1.75 "DD4" 1.65 "DD6" 1.65 OUTLINE DIM. "B" 1.46 1.60 2.00 1.18 1.46 "B" 37.1 40.6 50.8 30.0 37.1 "C" .15 .12 .12 .15 .15 "C" 3.8 3.0 3.0 3.8 3.8 "D" 1.350 1.500 1.500 1.350 1.350 "D" 34.29 38.10 38.10 34.29 34.29 "E" .36 .30 .50 .22 .36 "E" 9.1 7.6 12.7 5.6 9.1 "F" .726 1.000 1.000 .750 .726 "F" 18.44 25.40 25.40 19.05 18.44 "G" .32 .25 .25 .32 .32 "G" 8.1 6.4 6.4 8.1 8.1 "H" 1.00 1.25 1.25 1.00 1.00 "H" 25.4 31.8 31.8 25.4 25.4 "J" .140 .125 .125 .125 .140 "J" 3.6 3.2 3.2 3.2 3.6 "K" .76 .83 .83 .84 .83 "K" 19.3 21.1 21.1 21.3 21.1 "L" .92 .98 .96 .77 .71 "L" 23.4 24.9 24.4 19.6 18.0 "M" .16 .19 .19 .19 .16 "M" 4.0 4.8 4.8 4.8 4.0 "N" 1.55 1.70 1.75 1.55 1.55 "N" 39.4 43.2 44.5 39.4 39.4 "P" 1.70 2.00 2.00 1.70 1.70 "P" 43.2 50.8 50.8 43.2 43.2 "R" .38 .38 .38 .38 .38 "R" 9.7 9.7 9.7 9.7 9.7 "S" .40 .40 .40 .40 .40 "S" 10.2 10.2 10.2 10.2 10.2 1. Outline DD4 uses a separate adjustment screw for coarse and fine tune vs. the concentric adjustment shown. DIMENSIONS: MM "A" "DD" 41.9 "DD1" 44.5 "DD2A" 44.5 "DD4" 41.9 "DD6" 41.9 OUTLINE DIM. All dimensions are in inches and [mm]. SP ECTRU INC. MICROWAVE A Spectrum Control Business SPECTRUM MICROWAVE * 2144 Franklin Drive N.E. * Palm Bay, Florida 32905 * Phone: (888) 553-7531 * Fax: (888) 553-7532 783 www.specwave.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 DROs M |
Price & Availability of MDR2100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |